A pot filler faucet is a luxury item in most modern kitchens. While they have been around for years, most kitchens don’t have one. We’ll talk about the different types of pot filler faucets and what each one is best for.
There are two main types of pot fillers. A wall mount pot filler is the most popular but can be challenging to add because the piping runs within the wall behind the stove.
A deck mount pot filler is the next option, and it mounts to the counter beside the range. That is the easiest option because you can run the piping inside the cabinet.
Some commercial-style sink faucets have a pot filler sprayer option. While not an actual pot filler, it meets the need and is the easiest to install because you just switch out your existing kitchen faucet.
The Best Pot Filler Picks For 2023
Below are our top pot filler faucet picks for 2023.
Delta Faucet Traditional Pot Filler Faucet
The Delta pot filler faucet has a brass body. As a result, it can withstand heavy-duty use, wear and tear, corrosion, and heat for a long time. Also, its oil-rubbed bronze finish enhances its durability and makes it easy to clean and maintain because it doesn’t show marks. And it can fit right in any traditional kitchen design.
Due to its wall mount design, the Delta pot filler is a good choice for anyone with large pots. You can quickly fill them with cold water when they are on a stovetop, thanks to its 4 Gallons Per Minute (GPM) water flow rate. And you can also extend its reach to your kitchen sinks, thanks to its 24-inch extension and dual swing joint design. But when it’s not in use, you can push it back until it’s adjacent to the wall, increasing your working space.
The traditional pot filler uses a single-hole configuration, easing installation a little. And due to its ADA-compliant design, you can efficiently operate the faucet using its dual handles.
In addition, if an issue arises concerning the Delta faucet, you can always take advantage of its limited lifetime warranty.
Moen Traditional Spot Resist Stainless Pot Filler
The Moen Spot Resist Stainless Pot Filler has a metal body and Spot Resist stainless finish. As a result, it’s pretty durable and an excellent choice for a modern kitchen. And thanks to its finish, it is highly resistant to watermarks and fingerprints. That, in turn, makes it easier to clean and maintain over the long term.
Due to its wall mount design, the Moen pot filler frees up your counter space. It has dual joints that extend for at least 24 inches from the wall, allowing you to fill your pots and pan over a wide area, including the cooktop, and the adjustable arm retracts completely when not in use.
In addition, it has two handles that enable you to control the water flow via the tap or base, depending on your needs. So, if you are cooking, there’s no need to reach over a kitchen stove’s hot surface to open or close the faucet.
Read more on Moen kitchen faucets.
JZBRAIN Wall Mount Stainless Steel Commercial Pot Filler
The JZBRAIN Pot Filler has a Sus 304 stainless steel body, brass ceramic disc valve, and polished finish. For that reason, it is leak free, more hygienic, and highly resistant to corrosion, enabling you to use it outside safely. Also, it is lead-free, making it a safer and eco-friendlier option for your family, pets, and the environment. And it is pretty elegant and suitable for any modern kitchen too.
You don’t have to worry about ease of operation with this product. The JZBRAIN pot filler comes with dual valves that enable you to control the water flow from two points. It also has a double-jointed spout that extends out 21 inches and can swivel 360 degrees, further extending your range of motion and helping you cover six stoves over the kitchen counter. And when not in use, the adjustable arms can retract completely, enhancing your space.
Also, the pot filler has a maximum flow rate of 5.5GPM, which is excellent for heavy-duty home use. That’s because it also incorporates a Swiss Neoperl Aerator, which provides a steady pressure and consistent water flow that is more of a quiet aerated stream with no splashing.
In addition, the pot filler faucet has a single-hole wall mount design and comes with mounting hardware. Therefore, it is easier to set up the tap once the water lines are in the back wall.
LEPO Pot Filler Faucet
The LEPO Pot Filler Faucet consists of brass and brushed nickel. For that reason, it is durable, resistant to heat, and great for contemporary spaces. Also, the finish is rust-resistant, durable, and will help hide the watermarks and fingerprints better, making long-term cleaning and maintenance a breeze.
The wall-mounted pot filler incorporates a Quick-In system. The design ensures that you can install the faucet within 15 minutes by following three simple steps. There’s no need for professional plumbers or special tools. So, it’s an excellent fit for any DIY enthusiast looking to save money.
You’ll enjoy maximum convenience when operating the LEP pot filler faucet, even over large kitchen sinks or four-burner cooktops. That’s because its dual swing joints can extend outward for 26 inches. And those joints can swivel 360 degrees, allowing you to use one hand to control the water flow from the spout or base. And when the pot filler is not in use, you can fold the articulated arm away from your working space and flush against the wall, saving space.
It is worth noting that the pot filler also includes an ABS aerator that ensures the water flows relatively straight. That, in turn, saves water to some extent.
CWM Pot Filler Faucet
The CWM Pot Filler Faucet has a stainless-steel body and brushed stainless steel finish, making it durable, rust-resistant, stylish, easy to maintain, and hygienic. Even when you use it over a hot stove for long periods, it will still look new. And thanks to its brass ceramic cartridge, it will remain leak-free. Also, its polished inner surfaces are lead-free, enhancing the safety of all users and the environment.
With the CWM pot filler, you can choose cold and hot water. However, you can only use one or the other, not both. However, regardless of your preference, the CWM Aerator will ensure you can get a consistent water flow rate of 3.5GPM at a steady pressure.
In addition, you don’t have to worry about operating the CWM pot filler. Its spout has a 20.5-inch reach from the wall, and the dual swing joints will enable you to retract the faucet when it’s not in use. Also, the double handles point downward to prevent collision with cabinets. And you can take advantage of the two available valves to control the water flow from two points.
Furthermore, the pot filler has a single-hole wall mount design. That makes it easier to set up the faucet once the water lines are accessible.
Tutew Deck Mount Pot Filler Kitchen Faucet
The Tutew Deck Mount Pot Filler Kitchen Faucet has a brass body and a matte black finish. The solid brass construction enables it to withstand heavy-duty use, heat, and wear and tear, while the matte black finish helps you to clean and maintain it easily.
Also, the finish is glamorous and is one of those design elements that stands out and acts as a focal point in any space. It works well with black, white, and even eclectic colored kitchen sinks.
Unlike the previous kitchen faucets, the Tutew pot filler has a deck mount design. As a result, the tap will be a great fit if you have a food prep sink or an island bar sink. Also, it is easier to install because the water supply lines are right underneath the cabinets.
In addition, the Tutew pot filler comes with an instruction manual, hot and cold-water lines, and other mounting hardware you may need. So, if you are a DIY enthusiast, you will find it easy to set up within 30 minutes.
If water is a concern, the Neoperl aerator in the pot filler will come in handy. Its design ensures consistent water flow with steady pressure and minimal splashing. And its ceramic cartridge will keep the faucet drip-free for its working life.
Kraus Artec Pro Commercial Pull-Down Kitchen Faucet with Pot Filler
The Kraus Artec Pro Faucet with Pot Filler consists of a solid brass sprayer, lead-free brass water lines, and an all-metal body. As a result, it is great for high-traffic areas and heavy-duty use. It is also an excellent option if you frequently use hot water and prefer something durable.
The product also has a Spot Free stainless-steel finish. The finish enhances the faucet’s durability while giving it a modern look.
It is worth noting that the Krause Pro kitchen sink faucet is multi-functional. It combines an open-coil spout, a rotating pot filler, and a pull-down sprayer, allowing you to perform a wide variety of kitchen tasks conveniently.
The sprayer has an ergonomic retractable hose to use when cleaning and provides a spray function that removes stubborn food residues. And the swing spout with a high-arc design swivels 360 degrees, extending the faucet’s range of motion without hitting the pot filler. On the other hand, the pot filler provides an aerated stream capable of filling big pots and pitchers that require more clearance.
The pot filler and spout have independent rotation mechanisms, further enhancing the ease of use. And thanks to the innovative handle design, you can rotate it forward 90 degrees, enabling you to work even in tight spaces without backsplash clearance.
In addition, the Krause kitchen faucet has a deck-mount design that allows for easy installation. And it is DIY-friendly due to its already incorporated mounting hardware and pre-attached water lines. The single-hole configuration also makes the setup even more straightforward.
If any problem arises concerning the product, you can take advantage of the excellent customer service and limited lifetime warranty.
How to Select the Best Pot Filler for You
Below are strategies to select the best pot filler faucet for your needs.
Consider Your Kitchen Layout and Design
Always consider the kitchen layout and design when selecting your pot filler faucet. For example, if your kitchen has a classic style, you must consider a faucet that will fit the timeless theme. So, a product with a matte black finish may be the best option.
On the other hand, where space is an issue, you may be better off with a wall-mounted pot filler whose adjustable arm retracts entirely into the wall. That way, when the faucet isn’t in use, you can push it out of the way. However, such a faucet may not work in an island bar sink. Such sinks are only compatible with deck-mounted pot fillers.
Set Out Your Budget
Typically, kitchen faucets cost anywhere from $300 to $1,000 to purchase. However, some may cost under $200. But you also need to factor in delivery, labor, and building permit costs.
Depending on the complexity of your faucet, where you live, and how much work you need to do to put up water lines on the wall, you could end up paying over $2,000 to install a pot filler in your kitchen. For that reason, you should prioritize DIY-friendly products.
Select Your Preferred Features
Sink faucet pot fillers offer different features which enhance their ease of operation and aesthetic appearance.
For example, if you are looking for a leak-free faucet, it would be best to buy one with a ceramic disc valve. The value withstands wear and tear well, enhancing its durability. And it also has fewer components, reducing leakages over the long term. As a result, they are an excellent option for anyone looking for a durable and eco-friendly tap.
The number of handles and their performance also matter. It determines the pot filler’s ease of use. Some things to look out for include the available joints and their swiveling ability, how of an arc a spout has, the adjustability of a folding arm and the extent to which it reaches out, etc. These features will also play a significant role in ensuring you can clean and fill pots and pans with ease. And they will also determine how easy it will be to maneuver around the sink area when the pot filler is on or off.
Another aspect of features to consider is the materials used for construction. Brass and stainless steel are attractive, durable, and highly rust-resistant. The former suits traditional design themes, while the latter is better for contemporary kitchens. But both have the price to match the benefits they offer you.
Your goal should be to find the most durable, flexible, and retractable faucet without compromising on the range of motion it offers.
Ease of Installation
Deck-mounted faucet pot fillers tend to be easier to install than wall-mounted ones. However, most pot fillers are mounted on the wall. So, you need to look for other features to determine how easy it will be to install them.
For starters, single-hole pot fillers would be much easier to set up than products with more than one hole. But you should also prioritize those simply designed and come with mounting hardware and instruction manuals.
Also, consider buying faucets with pre-attached water lines and quick setup systems. Then, you can install them even when you don’t hire a professional plumber.
Pot Filler Faucet FAQs
Below are answers to some of your pot filler questions.
What is the Point of a Pot Filler?
A pot filler faucet ensures you can fill your pots and pans at the stovetop without having to clutter your sink and counter space or make lots of trips from one area to another. They are also great for enhancing the aesthetics of your kitchen while keeping your space free from other activities.
Is it Worth Installing a Pot Filler?
It’s worth installing a pot filler if you want to cook a lot (especially soups) and have a large renovation budget. While it is pricey, it does enhance the glamour in your kitchen.
Do Pot Fillers Increase Home Value?
Pot fillers are worth adding if you want to enhance the financial value of your kitchen space. Studies show that they can add up to 3.2 percent to your home sale price, which makes them even more valuable than a barn door or pendant lighting.
Do Pot Fillers Just use Cold Water?
Most pot fillers use cold water, but beverage pot fillers can use hot water. Generally, the rule of thumb is that you can only use your pot filler for either hot or cold water, but not both. That’s because they don’t incorporate a mixer.
Is a Pot Filler a Good Idea?
If you have a large budget for faucets, love to cook, have a busy kitchen, hate handling heavy pots and pans, and prefer something easy to clean, a pot filler is a good idea.
